Search Log in / register
ZA
Sample Cart
EB-A12p
RCD-M9BE Fully-Automatic Insulation Displacement Machine ID Machines for 2.0mm & 2.5mm Pitched Ribbon Cable
  • Features
  • Downloads

RCD-M9BE (Fully Automatic Insulation Displacement Machine)

The RCD-M9BE is a Fully Automatic Insulation Displacement Machine used to process 2mm and 2.5mm pitched ribbon cable.
This machine has been designed to cut, slot, semi or full strip and also pre-form the ends of the wire for PCB insertion. It will also simultaneously terminate ID connectors onto one or both ends of the cable.

Specifications:-

  • Power Source: 200V AC, 3 Phase, 2.5kVA
  • Air Pressure: 590 to 640 kPa (6 to 6.5kgf/sq.cm)
  • Air Consumption: Approx. 500N litre/minute
  • Installation Dimensions: Approx. 6,310x1,250x1,785mm
  • Weight: Approx. 1,100kg
  • Type of Harness: Double-ended Harness
                             Single-ended Harness (with full/semi-strip or pre form)
  • Length of Harness: 53 to 1,300mm
  • Strip Length: Semi stripping 5 to 13mm
                       Full stripping 3 to 13mm
  • Wire Length Accuracy: +/-2mm
  • Processing Capacity: 550 cycles per hr (Based on a length of 400mm)
  • Applicable Connectors: JST'S 2.0mm and 2.5mm pitch Insulation displacement connectors

Full Technical Drawings

If you require full technical drawings or any other in-depth information about this product series, please contact us using the link below.

Contact Us

Additional Information

This product series has some additional information related to it that you can download from the list below.

RCD-M9BE Data Sheet