Search Log in / register
ZA
Sample Cart
ph-_1
PH CONNECTOR 2mm Pitch Disconnectable Crimp Style
  • Features
  • Specification
  • Downloads
  • Tooling
  • Samples

This is a thin, low-profile 2.0mm pitch connector 8.0mm in height after mounting and 4.5mm in width.

It is designed to meet the demand for high-density connection of internal wires to printed circuit boards. It is compact, highly reliable and low in cost.

 

 

 

 

  • Reliable contact

The contact has long dimples near the centre to ensure a good connection at all times, even under conditions of vibration and mechanical abuse, and when used with low voltage and low current circuits.

  • Fully shrouded header

The fully shrouded header has walls on all four sides to prevent improper connection to the mating housing and to prevent the intrusion of flux and other contaminants.

  • Printed circuit board retention mechanism

The solder side of the header has a retention mechanism that prevents it from floating during soldering. As a result, the header can be positioned accurately.

  • Surface mount model (SMT)

This connector is also available in a surface mount configuration. Its housing is made of heat resistant resin so that it is not adversely affected during reflow soldering. Because of its tiny size and ability to be surface mounted, this connector meets the demand for high-density mounting of components inside electronic products.

  • Standards

UL Recognized E60389

TUV Certified R75087

  • RoHS Compliant

01 - Connection Type: Printed Circuit Board Connectors
02 - Product Type: Wire to Board Crimp style Connectors
03 - Pitch / Style: 2.00mm
04 - Current rating: 2A AC,DC
05 - Voltage rating: 100V AC,DC
06 - Temperature range: -25 to +85 Degrees Celsius
07 - Available number of circuits: 2 to 16
13 - PCB Mount Style: Surface Mount Technology (SMT)
13 - PCB Mount Style: Through-hole Technology (THT)

Full Technical Drawings

If you require full technical drawings or any other in-depth information about this product series, please contact us using the link below.

Contact Us
Can't find a Tool?

If you're having trouble finding the right tool, please contact our sales team.

Contact Us
Applicators (Industry Standard)

Please select a tool for more information.

CDS SPH002-05S/CMKS-L
Industry Standard (Semi Automatic) Applicator for SPH-002T-P0.5S
CDS SPH002-05L/CMKS-L
Industry Standard (Semi Automatic) Applicator for SPH-002T-P0.5L
CDS SPH001-05L/CMKS-L
Industry Standard (Semi Automatic) Applicator for SPH-001T-P0.5L
CDS SPH004-05S/CMKS-L
Industry Standard (Semi Automatic) Applicator for SPH-004T-P0.5S
CDS SPH001-05S/CMKS-L
Industry Standard (Semi Automatic) Applicator for SPH-001T-P0.5S