Search Log in / register
ZA
Sample Cart
dd_ds
DD/DS CONNECTOR 2mm Pitch Board-in IDC
  • Features
  • Specification
  • Downloads
  • Tooling
  • Samples

The DD and DS right angle board-in insulation displacement connectors measure just 3.5mm (.138") in mounting height and 4.3mm (.169") in width.

Since these right angle connectors are connected to wires running parallel to the printed circuit board, electronic equipment can have a lower profile.

These connectors are suited for the high density wiring of electronic products.

 

 

 

 

  • Compact and low-profile

These connectors are very small, with a mounting height of 3.5mm (.138") and a thickness of jsut 4.3mm (.169").

  • Twin U-slot insulation displacement section

The insulation displacement section to which the wire is connected is composed of two highly reliable tin-plated slots (twin U-slots).

  • Compliant locking solder tails

The contact solder tails are elastic and have two locking positions, both of which ensure stable connection once inserted into a printed circuit board. The two locking positions of the DD connector are asymmetrical and best suited for use with 0.8mm (.031") and 1.0mm (.039") thick printed circuit boards. The two locking positions of the DS connector are also asymmetrical for use with 1.2mm (.047") and 1.6mm (.063") thick PC boards.

  • Strain relief

Thanks to the strain relief construction, the wire insulation is held by the housing when the wire is terminated. Furthermore, sufficient clearance is provided between the insulation displacement section and the strain relief section to ensure decoupling from vibration and tension.

  • Standards

UL Recognized E60389

CSA Certified LR20812 

  • RoHS Compliant

 

01 - Connection Type: Printed Circuit Board Connectors
02 - Product Type: Wire to Board Insulation Displacement Connectors
03 - Pitch / Style: 2.00mm
04 - Current rating: 0.7A AC,DC
05 - Voltage rating: 100V AC,DC
06 - Temperature range: -25 to +85 Degrees Celsius
07 - Available number of circuits: 2 to 15
13 - PCB Mount Style: Through-hole Technology (THT)

Full Technical Drawings

If you require full technical drawings or any other in-depth information about this product series, please contact us using the link below.

Contact Us

Additional Information

This product series has some additional information related to it that you can download from the list below.

Catalogue Page
Can't find a Tool?

If you're having trouble finding the right tool, please contact our sales team.

Contact Us
Applicators (For ID Connectors)

Please select a tool for more information.

DS DD/DS/MKD-LP
JST Standard (Semi Automatic) Applicator for DD/DS Connector Series.  Use in conjunction with AP-K2N Press
H2A-DD APPLICATOR
Applicator for the DD connector series. Use in conjunction with HPD-M2A Handpress or AP-2D Pnuematic Press